[Special Edition] 50W Eleaf iStick 4400mAh OLED Screen MOD Battery
[Special Edition] 50W Eleaf iStick 4400mAh OLED Screen MOD Battery, genuine Eleaf products and same excellent performance, while with novel colors. It can also support sub ohm coil.
Может быть, это было прекращено снабжение.
Вы должны выбрать другой продукт на нашем сайте. Большое спасибо!
1. Shipping restriction: Due to exclusive distributor of Eleaf, we do not send Eleaf products to customers in South Korea or UK. More shipping restrictions, please check here.
2. Notice: Eleaf now requires S/N (serial number) before providing replacements (due to counterfeits in market). We recommend you to keep the packing boxes after you get parcel, or take a picture of SN before you discard it. Thank you!
[Special Edition] 50W Eleaf iStick Battery 4400mAh
Product Introduction[Special Edition] 50W Eleaf iStick 4400mAh OLED Screen MOD Battery, iStick 50W is a super upgraded edition based on iStick series which brings more powerful vapor due to the expanded range of output voltage (2V - 10V), wattage (5W - 50W) with 4400mAh battery capacity.
Size (length x width x height): 23.0 X 45.0 X 83.0mmColor: blue and white porcelain, carbon fiber black, ripple waves and wood
Thread Type: 510 Thread
Variable voltage: 2.0V - 10V
Variable wattage: 5W - 50W
Minimum resistance value: 0.2Ω - 5Ω
50W iStick battery comes with
- 1 x iStick battery
- 1 x Manual
Simple packing. Customary Packing from the factory, the packing is subject to change without notice.
1. OLED screen
2. 4400mAh large capacity
3. VV/VW Mode, Max 50W output
4. Spring connector
6. Pass-through function
7. High Stability: The output wattage is in high stability. It can also be up to the high output wattage even in the case of low power.
Turn on/of: you can power it on or off by 5 consecutive clicks on the button.
Switch the VV/VW mode: Press the square button for three times to switch the VV/VW mode when the battery is turned on. In VV mode, you can adjust output voltage between 2.0V - 10.0V. In VW mode, you can adjust output wattage between 5W - 50W.
Adjust the voltage/wattage: Press the up-and-down arrow buttons to increase or decrease the voltage/wattage. Keep pressing the up/down arrow button, voltage/wattage will increase or decrease slowly at first, then they will increase/decrease at a constant high speed. The number will stop increasing/decreasing when you loosen the up/down arrow button.
How to charge
iStick 50W can be charged through USB port near the top of battery. It will take 5 hours to charge the battery via 1A wall adaptor.
Temperature Alarm function: If the temperature of device is over 70 degree, the output will shut off automatically and the screen will reflect "Temp Protection" for 5 seconds.
- It comes with extra an 510-eGo thread, can work with ego/510 threaded clearomizers/tanks.
- No cartomizer/tank comes with.
- There is CE mark on battery end.
DOA (Dead on Arrival) ONLY!
Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.
Share your thoughts with other customersНаписать обзор
Typical questions asked about products:
- Is the item durable?
- Is this item easy to use?
- What are the dimensions of this item?