Ehpro Morph RTA Rebuildable Tank Kit with Three Adaptors
Product IntroductionEhpro Morph RTA Rebuildable Tank Kit with Three Adaptors, is the new innovative rebuildable tank, coming with 3 different adaptors, which enables you to use atlantis, subtank and delta II coil on it. You will enjoy more changes and more fun.
Size (diameter *height): 23 x 69 mm
Material: stainless steel, pyrex glass
It comes with
- 1 x complete Ehpro Morph RTA tank
- 1 x ATL chimney + bottom adaptor
- 1 x SUB chimney + bottom adaptor
- 1 x DEL chimney + bottom adaptor
- 1 x screwdriver
- 1 x O-rings and screws
- 1 x cotton
Simple packing. Customary packing from the factory, the packing is subject to change without notice.
Three types of different Coil Chimney and base available
How to Install: align the base with airflow control (AFC) ring. Make sure the notch on the inner side the AFC ring is aligned with the screw on the base of the RTA;
Screw the bottom RBA adaptor int othe base, then screw the RBA section into the bottom RBA adaptor. Turn clockwise to tighten;
Screw the Chimney adaptor into the top cap clockwise and make sure it is securely in place;
Install the quartz glass tank onto the glass tank base and screw the top cap with the chimney adaptor tightly into the glass base to secure the quartz glass tank in place;
Install the base assembly into the glass tank assembly by threading clockwise and then install the drip tip.
How to use RBA Coil: you can rebuild your coils on the deck of the RBA section. Make sure NOT to block the intake air flow cotton. This will prevent the tank from functioning properly. Screw the sealed tube to the RBA section (clockwise to tighten).
How to fill the oil: twist off the atomizer base assembly clockwise. Make sure that the glass tank assembly is tilted at an angle while filling with e-liquid.
Warning: do not overfill. The e-liquid should not go past the center chimney;
Install the base into the glass tank assembly clockwise. Make sure they are tightly connected;
It comes with spring-loaded 510 thread, compatible with most 510 thread cartomizers.