Joyetech eVic VTC Dual TC MOD W/O Battery

Product Introduction

Joyetech eVic VTC Dual 18650 TC MOD, a new product of eVic VT series, features the replaceable back cover for alternatively using one or two cells as you prefer where max output can be reached to 75W and 150W respectively. Moreover, various protections and upgradable firmware will give you a constant great vaping experience.


Parameters

Size: 23 x 38 x 86mm (with one cell)
23 x 55.5 x 86mm (with two cells)
Output Mode: RTC/VT (Ni/Ti/SS316)/VW/TCR/BYPASS Mode
Output Wattage: 1-75W(one cell) /150W(two cells)
Temperature Range: 100-315°C (200-600°F)
Resistance Range: 0.05-1.5ohm for VT/TCR mode;0.1-3.5ohm for VW/BYPASS mode
Battery cell: 1 or 2 18650 batteries (with rated discharge current no less than 25A)
Colors: Black, White, Burgundy, Blue, Orange


It comes with

  • 1 x eVic VTC Mod with Dual Back Cover (for 2 cells)
  • 1 x Back Cover (for 1 cell)
  • 1 x USB Cable
  • 1 x User Manual
  • 1 x Warranty Card

Simple packing. Customary Packing from the factory, the packing is subject to change without notice.


Replaceable Battery Cover For Alternatively One Or Two Cells
Onboard Reverse Polarity Protection
RTC (Real Time Clock) Display
Dual Circuit Protection
Upgradable Firmware

Applied with exquisite 510 Thread (with spring connector)

Power on/ off: Hold the back cover and slide to take it off. Put the 18650 battery into the back cover and push it back into the body. Press the fire button 5 times in quick succession to turn the device on and off. Repeat the action to change the cover which holds 2 cells.

Vaping: Hold the fire button and inhale through the mouthpiece. Release the fire button and exhale.

Charging & Upgrading: Please use high-rate 18650 cells with continuous rated discharge current no less than 25A. We suggest you take out the cells and charge them with a stand alone charger. The micro USB port is on the top of the left side. Connect it with a micro USB cable to charge or upgrade you device.

Stealth function: When the device is on, simultaneously hold the fire button and left regulatory button. This will switch between stealth on and stealth off function. In stealth on mode, you can still vape with the screen off.

Key lock function: When the device is on, simultaneously press the two regulatory buttons. This will switch between adjustment lock and adjustment unlock function. While key lock is on, the regulatory button will not work to prevent accidental adjustments.

Switch the display mode: Press the press the two regulatory buttons simultaneously in power off state, the display will rotate 180 degrees.

Set screen protection time: When the device is on, simultaneously hold the fire button and the right regulatory button to enter into adjustment interface. Choose the time and press the fire button to confirm.

How to set the time: Press the fire button 3 times to enter into the setting menu. Press the left regulatory button to switch between hour, minute, year, month and day. Press the right regulatory button to adjust the parameter.

Switch among different modes: Press the fire button 3 times to enter into the setting menu. Press the right regulatory button to switch among TEMP/ TCR/ POWER and BYPASS modes. Press the fire button to confirm.


3 months of eVic VTC Dual MOD. Please check Guarantee Policy.

Note: We now need serial number to proceed after-sales service. Please kindly preserve the serial number of product if it's available.