VapeOnly Arcus Atomizer - 2ml

Product Introduction

VapeOnly Arcus Atomizer - 2ml is an exquisite tank inspired by the hourglass. e-Juice is gradually decreasing with passing time just like sands running out. With 1.5 ohm and 1 ohm coil, you can enjoy both mouth inhale and mouth to lung inhale. Also you can decorate the tank with replaceable sealing o-rings.


Size: 16.8mm (D) x 49.5 (H)
e-Juice capacity: 2ml
Coil resistance: 1ohm (10W-17W);1.5ohm (7W-11W)
Material: SS + Pyrex Glass

It comes with

  • 1 x Arcus atomizer -2ml (pre-installed 1ohm coil and orange o-rings)
  • 1 x 1.5ohm coil
  • 8 x O-rings (Green, Blue, Purple, Black)
  • 1 x Manual

Simple packing. Customary packing from the factory, the packing is subject to change without notice.

VapeOnly Arcus Atomizer - 2ml

Innovative top filling
Good mouth inhale experience

4 colors replaceable sealing rings

How to fill the cartomizer?
1. Unscrew the top component anti-clockwise from the top of the cartomizer.
2. Fill the e-liquid from the top, the e-liquid should not be over the little hole on the top.
3. Install the top component clockwise on the top of the atomizer.

Air flow adjustment
1. Turn clockwise to increase airflow.
2. Turn anti-clockwise to decrease airflow.

How to replace/clean the coil?
1. Hold the atomizer upside down, remove the air adjusting ring component from the bottom of the atomizer upward, anti-clockwise.
2. Disconnect the old coil unit.
3. Install the new or cleaned coil unit into the atomizer. (Clean the coil with alcohol sponge or dry cotton cloth).
4. Connect the air adjusting ring component downward and screw it on tightly.

Our images are copyrighted. It is forbidden to reprint without our permission.

VapeOnly Arcus Atomizer - 2ml